Advantages and main uses of bottled water automatic filling machine

Automatic bottled water filling machine with correct quantification, small dispensing error, and easy adjustment. It is used for quantitative dispensing of tile backing, waterproof paint, construction glue, etc. The whole machine is made of stainless steel for material contact, with novel and beautiful shapes. It is the ideal equipment for quantitative dispensing of small doses of liquid.

　　Advantages of bottled water automatic filling machine.

　　1、This machine is mainly used for beverage operations: this machine will rinse, fill and cap three-in-one functions into one

　　2, the whole process to achieve automation, suitable for polyurethane bottles, plastic bottles filling juice, mineral water, plus temperature control device can also be hot filling, and

　　3、Adaptation of each part of the bottle type adjustment using the handle rotation to achieve, easy and comfortable, simple and fast.

　　4、Filling method: micro-pressure filling is adopted to make the filling speed faster and more stable, so compared with the same specification machine this machine has higher output and greater benefits.

　　5、The machine adopts OMRON programmable frequency converter (PLC) to control the automatic operation of the machine, and the bottle feeding chain adopts frequency control to make the bottle feeding run faster with the main machine. Optical detection of the operating condition of the brother parts, high degree of automation, easy to operate. On this basis, the machine changes the filling part, which can form a low vacuum filling method. It is suitable for filling wine, soy sauce, and other materials in glass bottles, and its sealing method can be optional metal anti-theft cap and plastic cap, which is the ideal equipment for beverage manufacturers.

　　Bottled water automatic filling machine is mainly used for filling wine, soy sauce, vinegar, and other bottles which are easy to froth and need consistent liquid level.

　　(1)Adopting the principle of low vacuum filling, filling against the bottle wall, no choking, no frothing, and ensuring the consistency of liquid level after filling.

　　(2) Bottles with defective bottles are automatically not filled, no spilling of liquid, no broken bottles, and automatic adaptation of bottle height error. The carefully designed bottle-holding device is made of exquisite materials and high-quality materials, and the service life of the bottle-holding device is ensured by reasonable design, processing technology, and accurate compression and shock absorption ratio.

　　(3)Filling valve adopts the filling principle of the filling industry, reasonable design, excellent quality, and accurate processing parts to ensure the liquid level requirement after filling.

　　(4)Without taking off the filling valve, just hold the valve upwards and turn it clockwise to take 15 degrees to put the filling valve in the normally open state, at which time it is convenient to reverse flush the filling barrel and filling valve. Adopt single pin fixed valve body type structure, lightly pulling the pin can pull out the spool as a whole, the principle is simple, and the maintenance and convenient.

　　(5) The filling machine uses an imported high-sensitivity liquid level probe, imported liquid level control device, and inlet pneumatic angle seat valve to make the liquid level in the filling barrel control fluctuations. This device can realize synchronous action with the incoming wine pump, and liquid filling can be realized without a high-level tank.