A drinking water filling machine is mainly composed of a frame, mechanical transmission system, film feeding system, traction mechanism, film washing and sterilization device, ultraviolet device, heat sealing, and cutting device, filling equipment, etc. All of them are made of stainless steel and meet the requirements of food production. Each process is accurately completed by the PLC control center through a touch screen using a computer program according to the design requirements.
The empty barrel washed inside and outside is fed into the automatic barrel system by the conveyor chain, and after 4 barrels are counted by the barrel counter, the barrel blocking cylinder moves to stop the barrel; the barrel pushing cylinder moves to push the barrel into the barrel turning frame and then reset; the barrel turning cylinder moves to turn the barrel to the horizontal and wait for the time to feed the barrel; the barrel feeding cylinder moves to push the barrel into the barrel tray and then reset; the spindle waiting for the barrel washing. cylinder action, empty barrel with the chain movement a station, into the inverted shape; after the barrel on the barrel cylinder reset, on the barrel block barrel cylinder reset, and start the next cycle on the barrel action.
Cleaning, lubrication, inspection, and tightening as the center, in the work, and after work are required to carry out routine maintenance, routine maintenance by the operator to complete independently.
(1) The first level of maintenance work is based on routine maintenance, the focus of work is on lubrication, fastening, and inspection of the relevant parts and their cleanliness, and the first level of maintenance is by the mechanical team leader's guidance, mechanical operators to complete.
(2) Secondary maintenance work to check, and adjust the focus. Specifically to check the engine, clutch, transmission, transmission components, steering, and braking components. Second-level maintenance by the operator to assist the insurance personnel to complete.
(3) The third level of maintenance focus on detection, adjustment, troubleshooting of potential problems, and balancing the degree of wear and tear of the components. To affect the use of equipment performance and signs of failure of the parts of the diagnostic testing and status checks, and then complete the necessary replacement, adjustment, and troubleshooting work. The third level of maintenance requires comprehensive technical warranty personnel to complete with the help of testing equipment.